Toast Fit Guide

Kitchen fit

Measure the appliance and its operating space

Measure the width and depth available for the toaster, then compare those directions with the manufacturer’s published body dimensions. Packaging dimensions and an unlabelled length measurement are not substitutes for a known body axis.

Body size is only the first check. You also need the clearances in the instructions, room for the cord and plug, access to the crumb tray and a suitable operating position. A width match does not approve an enclosed space or establish what bread fits the slots.

The examples below illustrate the documented body-size boundaries. Read the model review for the source, dimensions and operating checks before choosing.

Maximum published body width

A width limit compares your entered maximum only with the reviewed model's published outside body width; it adds no clearance, and an unknown width cannot pass.

With earlier models included and two slices selected, an 11.9-inch body-width cap excludes T2707S because its exact page lists a 12-inch body width; this is not clearance.

Try these choices in the finder →

At a 12-inch cap under the same earlier-inclusive two-slice answers, T2707S enters at its exact listed body width; neither number establishes working clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Maximum published body depth

A depth limit compares only the published outside body depth; it does not account for overhead clearance, cord route, loading space, crumb-tray access or an unknown depth.

With earlier models included and two slices selected, a 6.9-inch maximum body-depth cap excludes TR3500SD because its exact table lists 7.0 inches; the current-reference 22721 remains inside at its published 6.2-inch depth.

Try these choices in the finder →

At a 7.0-inch depth cap under those same earlier-inclusive two-slice answers, TR3500SD enters at its exact listed body depth; the number remains a body screen, not clearance or crumb-tray access.

Try these choices in the finder →

With earlier models excluded, four slices and independent pair controls held constant, the 10.3-inch body-depth cap returns current-reference 24997F; 24217G's 10.4-inch body remains outside.

Try these choices in the finder →

At the next 10.4-inch body-depth step, 24217G and exact four-opening 24633G join 24997F under those same conditions.

Try these choices in the finder →

No current-reference two-slice toaster in this checked library meets the combined Bagel/Defrost need within a 6.2-inch body-width and 11.1-inch body-depth cap; 22796 begins at 6.3 inches wide.

Try these choices in the finder →

At the same 11.1-inch depth cap, raising only width to 6.3 inches admits the exact digital-display 22796 alongside the separate rotary-dial 22794 and 22794G.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

A one-tenth-inch width change leaves no reviewed match

With earlier=yes and two slices, a 6.5-inch maximum width excludes both 22622PS and exact suffix 22632PS because each maker page lists 6.6 inches; current-reference 22624G at 5.3 inches remains within the body screen.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A one-tenth-inch width change leaves no reviewed match

At a 6.6-inch body-width cap under the same earlier=yes and two-slice conditions, both 22622PS and 22632PS enter at their individually published 6.6-inch widths, and 22624G remains in at 5.3 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

exact Proctor Silex body-size boundaries

With earlier models included and two slices selected, a 6.3-inch body-width cap returns seven configurations; neither 22302 at 6.6 inches wide nor 22304 at 6.4 inches wide fits, while current-reference 22624G at 5.3 inches does. This outside-body screen is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

exact Proctor Silex body-size boundaries

At a 6.4-inch width cap under the same earlier-inclusive two-slice conditions, ten configurations match and 22304 enters at its listed width; 22302 remains outside at 6.6 inches. Body width is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

exact Proctor Silex body-size boundaries

With earlier=yes, two slices and a 6.5-inch maximum body width, eighteen configurations match: 22304 remains in at 6.4 inches, but 22302 still misses its 6.6-inch width. This is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

exact Proctor Silex body-size boundaries

Raising only the width cap to 6.6 inches under earlier=yes and two-slice conditions returns twenty-three configurations. It admits 22302 at its exact outside width and 22632PS at its separately listed 6.6-inch width; 22304 remains within at 6.4 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

compact 22612PS body-size boundaries

With earlier=yes and two slices selected, a 5.3-inch maximum body width admits six configurations, including Proctor Silex 22612PS, base 22624 and 22216G at their listed 5.3-inch body widths.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

compact 22612PS body-size boundaries

At the preceding 5.2-inch width cap under the same earlier-inclusive two-slice conditions, only 22989 and 22999 match; 22612PS, 22216G, base 22624 and 22624G fall outside at their 5.3-inch width. The base 22612 has no published body width and cannot be assumed to pass.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Use the 22632PS depth as a body-only boundary

With earlier=yes, two slices and a 10.6-inch maximum body depth, 22632PS is excluded because its exact page lists 10.7 inches; base 22632 also remains excluded because its dimensions are unknown. Earlier base 22624 at 10.3 inches remains within this body-only screen.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Maximum published body depth

At a 10.7-inch depth cap with earlier=yes and two slices, separate 22622PS and 22632PS enter at their individually published 10.7-inch outside depths; 22624G remains within its own 10.3-inch body. The base 22632 has no published body depth and does not pass the numeric screen.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

exact Proctor Silex body-size boundaries

Under earlier=yes and two-slice conditions, a 9.9-inch maximum body depth returns thirteen configurations but excludes both 22302, whose listed body is 10.0 inches deep, and 22304 at 11.3 inches. Depth is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

exact Proctor Silex body-size boundaries

At a 10.0-inch depth cap with earlier=yes and two slices, fourteen configurations match and 22302 enters at its listed body depth; 22304 remains outside at 11.3 inches. This does not provide loading room or tray access.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

exact Proctor Silex body-size boundaries

With earlier models included, two slices and an 11.2-inch body-depth limit, thirty-nine configurations match; 22302 at 10.0 inches is inside, but 22304 remains outside until its listed depth of 11.3 inches. The cap is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

exact Proctor Silex body-size boundaries

Raising only the depth cap to 11.3 inches while keeping earlier=yes and two slices fixed returns fifty-one configurations and admits both 22302 at 10.0 inches and 22304 at 11.3 inches. Outside-body depth is not operating clearance or tray-access space.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

compact 22612PS body-size boundaries

At a 10.1-inch maximum body depth with earlier=yes and two slices, sixteen configurations match, including 22612PS and 22216G at their listed 10.1-inch depth. The current-reference 22624G is outside this depth cap at 10.3 inches. Body depth does not include safe operating room or rear-tray access.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

compact 22612PS body-size boundaries

At a 10.0-inch maximum body depth under the same earlier-inclusive two-slice conditions, fourteen configurations remain, but 22612PS and 22216G are excluded at 10.1 inches; 22302 is a documented 10.0-inch body-depth example. This is not clearance or tray-access room.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Earlier 22624 body-depth boundary

With earlier models included and two slices selected, a 10.2-inch maximum body-depth limit excludes base Proctor Silex 22624 because its exact page lists 10.3 inches; body depth is not clearance or tray-access space.

Try these choices in the finder →

At the next valid 10.3-inch body-depth ceiling, earlier base model 22624 enters the two-slice result at its listed depth; its page does not establish fit for an actual counter, tray access or any particular bread.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A 7.8-inch width and 12-inch depth ceiling

With both body limits in place—7.8 inches wide and 12 inches deep—CPT-1200 joins CPT-160P1, CPT-1600, CPT-620P1, BTA850, KMT2109PL and KMT2109SX in this current reviewed library.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

An 8.1-inch width and 8.2-inch depth ceiling

Applying both an 8.1-inch published width limit and an 8.2-inch published depth limit leaves BTA850 as the sole current reviewed match.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

7.2 inches wide and 13.7 inches deep

With a 7.2-inch body-width ceiling and 13.7 inches of depth, CPT-160P1, CPT-620P1, KMT2109PL and KMT2109SX match; KMT2203FP still exceeds the 13.7-inch depth limit.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

7.2 inches wide and 13.8 inches deep

With a 7.2-inch width ceiling and 13.8 inches of depth, CPT-160P1, CPT-620P1, KMT2109PL, KMT2109SX and KMT2203FP pass the documented body-size screen; this does not certify clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

14.3 inches wide and 13 inches deep

With a 14.3-inch body-width ceiling and 13.0-inch body-depth ceiling, TSF01BLUS, Hamilton Beach 24217G and other exact-source models pass these outside-body limits; this does not establish clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

10.9 inches wide by 10.5 inches deep

With a 10.9-inch width ceiling and 10.5-inch depth ceiling, BTA850, BTA735 and BKT845 pass the documented body-size screen but CPT-435P1 misses width by one tenth; these are not clearance measurements.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

11 inches wide by 10.5 inches deep

At an 11.0-inch width ceiling and 10.5-inch depth ceiling, CPT-435P1 and the BKT845 toaster body pass both published outside-body limits; verify required clearance and access separately.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

The CPT-180P1 with both tenth-inch body limits

With an 11.2-inch maximum body width and a 10.7-inch maximum pictured-orientation body depth, seventeen reviewed configurations pass

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

15.3-inch width by 8.2-inch depth

At 15.3 inches wide and 8.2 inches deep, TSF01BLUS and BTA850 pass the body-only screen; wider TSF02BLUS does not pass 15.3 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

15.4-inch width by 8.2-inch depth

At 15.4 inches wide and 8.2 inches deep, TSF01BLUS, BTA850 and TSF02BLUS pass their printed body limits; verify clearance and the substantially different slot layouts.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

11.9 inches wide and 13 inches deep

With an 11.9-inch body-width limit and 13.0-inch body-depth limit, the TSF03BLUS and Hamilton Beach 24217G pass both table-value screens while the wider TSF02BLUS does not; neither result establishes clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Width can still block a toaster that fits the depth cap

With a 7.4-inch body-width cap and a 13.6-inch body-depth cap, Hamilton Beach 22996G and 22910 both fail width despite meeting the depth limit.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both 22996G body limits are met together

With a 7.5-inch width cap and a 13.6-inch depth cap, Hamilton Beach 22996G and 22910 pass both published outside-body comparisons; this does not certify operating space or counter fit.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

The depth condition can also exclude it

With a 7.5-inch width cap and a 13.5-inch depth cap, Hamilton Beach 22910 passes both body limits, while 22996G meets the width figure but misses the 13.6-inch depth condition.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22977J must pass both body dimensions

With a 10-inch maximum body width and 5.3-inch maximum body depth, the 22977J passes both published-body limits; add clearance and crumb-tray access separately.

Try these choices in the finder →

No reviewed model in this library meets both 9.9 inches maximum width and 5.3 inches maximum depth; this documented-set gap does not prove none exists elsewhere.

Try these choices in the finder →

Although the 22977J fits a 10-inch width limit, its 5.3-inch depth exceeds 5.2 inches; no reviewed model passes both, a limit of this library rather than the whole market.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both width and depth must pass for 22992

With earlier models excluded, two slices required, a 6.5-inch body-width limit and an 11.2-inch body-depth limit, six reviewed models match: 22217, 22714G, 22992, and the separate digital-panel 22796 and rotary-dial 22794/22794G codes.

Try these choices in the finder →

Tightening only the width limit to 6.4 inches leaves three current two-slice matches within both limits: digital-display 22796 and the separate 22794/22794G dial codes, each listed at 6.3 by 11.1 inches; 22992 is 6.5 inches wide and 22989, though 4.6 inches wide, is 15.9 inches deep.

No current two-slice toaster in this reviewed set fits both the 6.4-inch body-width and 11.2-inch body-depth caps.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A one-tenth-inch width change leaves no reviewed match

With both body caps, the no-earlier two-slice result at 5.3 inches wide and 10.3 inches deep includes 22624G and 22216G; the 22624G’s exact listed outside dimensions meet both screens.

Try these choices in the finder →

The 5.2-inch-by-10.3-inch case has no reviewed match in this library, which does not rule out models beyond it.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A one-tenth-inch width change leaves no reviewed match

Keeping a 5.3-inch width cap but lowering maximum depth to 10.2 inches excludes 22624G at its exact 10.3-inch body depth; 22216G remains in the two-dimension result.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A 6.4-inch cap with earlier models included

With earlier models included and a 6.4-inch maximum body width, 22989 and earlier 22999 pass at 4.6 inches; 22911 at 6.46 inches and 22912 at 6.5 inches remain outside.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both earlier two-slice models reach the 6.5-inch width step

With earlier models included and a 6.5-inch maximum body-width cap, sixteen configurations match, including 22215G at its published 6.5-inch width; the base 22215 and 22216 pages publish no body dimensions. Width alone is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

Earlier-model 6.8-inch body-width boundary

At a 6.7-inch earlier-inclusive body-width cap, eighteen configurations match; 22215G passes at its published 6.5-inch width, while 22990 and 22991 do not enter until the 6.8-inch step. These are outside-body limits, not clearance.

Try these choices in the finder →

At a 6.8-inch earlier-inclusive body-width cap, twenty-two configurations match, including 22215G at 6.5 inches; 22990 and 22991 reach their published 6.8-inch body widths at this step. This does not establish clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

The earlier-inclusive width input starts above 22999's listed width

At the finder's minimum 5-inch body-width ceiling with earlier models included, 22999 and 22989 both pass because each published body is 4.6 inches wide; the model's long 15.9-inch depth remains a separate fit concern.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Proctor Silex 24215PS outside-body boundaries

At an earlier-inclusive 11.9-inch body-width cap, 105 configurations match, including archive 24215PS at its 11.0-inch width; base 24215 has unknown width and cannot pass.

Try these choices in the finder →

At an earlier-inclusive 12.0-inch body-width cap, 107 configurations match, including archive 24215PS at 11.0 inches; base 24215 still cannot pass an unknown-width screen.

Try these choices in the finder →

At an earlier-inclusive 11.0-inch body-depth cap, 45 configurations match; the 24215PS body passes at 10.5 inches, while 24215 has unknown depth.

Try these choices in the finder →

At an earlier-inclusive 11.1-inch body-depth cap, 62 configurations match; 24215PS is inside at 10.5 inches, but 24215 has no published depth.

Try these choices in the finder →

At an earlier-inclusive 11.2-inch body-depth cap, 67 configurations match; 24215PS passes at 10.5 inches, while base 24215 remains unknown.

Try these choices in the finder →

At an earlier-inclusive 11.3-inch body-depth cap, 83 configurations match; measured 24215PS is within the limit at 10.5 inches, while 24215 is not numerically screened.

Try these choices in the finder →

At an earlier-inclusive 15.8-inch depth cap, 108 configurations match; 24215PS remains within its listed 10.5-inch body depth, while 24215's depth is unknown.

Try these choices in the finder →

At an earlier-inclusive 15.9-inch depth cap, 110 configurations match; 24215PS passes at 10.5 inches but base 24215 has no numeric depth.

Try these choices in the finder →

At an earlier-inclusive 11.5-inch depth cap, 88 configurations match; 24215PS is included at its 10.5-inch body depth, while 24215 cannot pass an unknown-depth filter.

Try these choices in the finder →

At an earlier-inclusive 11.6-inch depth cap, 92 configurations match; 24215PS remains within its 10.5-inch body depth, while 24215 remains unknown.

Try these choices in the finder →

At 11.0 inches of body width, the earlier-inclusive four-slice set has 23 matches and admits 24215PS at its listed 11.0-inch width.

Try these choices in the finder →

At an 11.1-inch body-width cap, the earlier-inclusive four-slice set has 30 matches, including 24215PS at 11.0 inches.

Try these choices in the finder →

At an 11.6-inch body-width cap, 32 earlier-inclusive four-slice configurations match, including 24215PS at 11.0 inches; this is not clearance.

Try these choices in the finder →

At the 11.7-inch body-width step, 34 earlier-inclusive four-slice configurations match, including 24215PS at 11.0 inches.

Try these choices in the finder →

With earlier models included and four slices required, a 10.9-inch body-width cap returns 14 configurations and excludes 24215PS because its listed width is 11.0 inches.

Try these choices in the finder →

With earlier models included and four slices required, a 10.4-inch depth cap returns seven configurations and excludes 24215PS at 10.5 inches.

Try these choices in the finder →

Raising the earlier-inclusive four-slice depth limit to 10.5 inches returns 12 configurations and admits 24215PS at its listed 10.5-inch depth.

Try these choices in the finder →

At an 11.0-inch body-depth cap, 18 earlier-inclusive four-slice configurations match, including 24215PS at 10.5 inches.

Try these choices in the finder →

At 10.9 inches deep, the earlier-inclusive four-slice set has 14 matches, including 24215PS at its 10.5-inch body depth.

Try these choices in the finder →

At an 11.1-inch body-depth cap, 23 earlier-inclusive four-slice configurations match; 24215PS passes at 10.5 inches.

Try these choices in the finder →

At 11.2 inches of body depth, the earlier-inclusive four-slice set has 25 matches, including 24215PS at 10.5 inches.

Try these choices in the finder →

At a 12.4-inch body-depth cap, 34 earlier-inclusive four-slice configurations match, including 24215PS at 10.5 inches.

Try these choices in the finder →

At the 12.5-inch depth step, the earlier-inclusive four-slice set has 36 matches, including 24215PS at 10.5 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A narrow body still misses a strict depth limit

With a 5.0-inch maximum body width and 15.8-inch maximum body depth, no current reviewed configuration matches: Hamilton Beach 22989 meets the width limit but is 15.9 inches deep.

This empty result reflects only the reviewed current U.S. set and these two body-dimension limits. The 22989 is the sole reviewed model within the 5.0-inch width cap, but exceeds the 15.8-inch depth cap by 0.1 inch; this is not proof that no other toaster exists.

Try these choices in the finder →

Both 22989 body limits are met at the boundary

With a 5.0-inch maximum body width and 15.9-inch maximum body depth, Hamilton Beach 22989 is the only current reviewed match in this library.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Two slices with a 7.5-inch width ceiling

With two slices required and a 7.5-inch body-width cap, Hamilton Beach 22910, 22623 and separate current-reference 22633G/22633V meet the reviewed outside-width screen; 24910 is four-slice and does not meet this capacity choice. Base 22633 is outside because earlier models are excluded.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

Four slices with an 11-inch width ceiling

With four slices required and an 11-inch body-width cap, plain Hamilton Beach 24910 joins at 10.94 inches and current-reference 24997F also passes at 10.2 inches; this does not establish clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A 6.5-inch width cap and 11.1-inch depth cap

With earlier models included, a 6.5-inch body-width cap and an 11.1-inch body-depth cap leave 22912; 22911 passes width but misses depth at 11.14 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Raising the depth cap to 11.2 inches admits 22911

With earlier models included, a 6.5-inch width cap and an 11.2-inch depth cap admit both 22911 and 22912; the 22911 joins when the depth limit reaches 11.2 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both body dimensions must pass for 22990 and 22991

At 6.8 inches wide but only 11.2 inches deep, both the 22990 and 22991 fail the second outside-body limit at 11.25 inches.

Try these choices in the finder →

With earlier models included, 6.8 inches width and 11.3 inches depth reach both 22990 and 22991’s published 6.8 x 11.25-inch bodies; these are body-only limits, not clearance.

Try these choices in the finder →

An 11.3-inch depth limit is not enough when the width ceiling is 6.7 inches; both 22990 and 22991 are 6.8 inches wide.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22994 just above a 6.7-inch body-width cap

With earlier models included, a two-slice requirement and 12-inch depth limit, a 6.7-inch width cap excludes the 22994 because its published outside-body width is 6.8 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22994 at its exact 6.8-inch body-width boundary

With earlier models included, a two-slice requirement and 12-inch depth limit, raising the width ceiling to 6.8 inches admits the 22994 at its exact listed body width.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22994 just beyond an 11.9-inch body-depth cap

With earlier models included, a two-slice requirement and 6.8-inch width limit, an 11.9-inch depth cap excludes the 22994 because its published outside-body depth is 12 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Lifecycle and depth screen interact

The same 10.5-by-5.5-inch paired body limits admit the earlier 22998 and current-reference 22977J when two slices and earlier=yes are selected; at 10.4 inches wide, only 22977J remains.

Try these choices in the finder →

Tightening the same paired screen to 10.4 inches wide leaves the 22977J but excludes 22998, whose body width is 10.5 inches.

Try these choices in the finder →

Even the 10.5-by-5.5-inch two-slice body screen excludes 22998 when earlier models are disabled; current-reference 22977J remains.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Earlier status, two slices and both counter dimensions

With earlier models included, two slices and a 24-inch depth ceiling, a 10.4-inch width limit returns fifty-five configurations.

Try these choices in the finder →

At a 10.5-inch width cap with earlier=yes, two slices and 24 inches of depth held, fifty-four configurations match, including 22215G at 6.5 inches wide and 22702, 22790 and 22796 at their separately documented bodies. This is not clearance.

Try these choices in the finder →

With earlier=yes, two slices and an 11.4-inch depth cap held, a 6.9-inch width ceiling returns twenty-three configurations, including 22215G at 6.5 by 10.3 inches and the separately documented 22702, 22782 and 22790 bodies. Neither body cap is working clearance.

Try these choices in the finder →

Raising the paired screen to 7.0 by 11.5 inches returns twenty-five earlier-inclusive two-slice configurations, including 22215G at 6.5 by 10.3 inches and 22790 at 6.88 by 11.06 inches. These limits are not working clearance.

Try these choices in the finder →

At a 7.2-by-11.7-inch earlier-inclusive two-slice screen, twenty-nine configurations match, including 22215G at 6.5 by 10.3 inches, 22790 and 22791/22792 at their own published dimensions. A body-only match does not promise counter fit.

Try these choices in the finder →

The 7.3-by-11.8-inch earlier-inclusive two-slice screen returns thirty configurations, including 22215G at 6.5 by 10.3 inches and the listed 22702, 22790, 22791/22792, 22782, 22785 and 22796 bodies. The limit does not promise counter fit.

Try these choices in the finder →

At a 6.9-inch width cap with earlier models and two slices, twenty-six configurations match, including 22215G at its 6.5-inch body width; body width is not clearance.

Try these choices in the finder →

The 7.0-inch earlier-inclusive two-slice width screen returns twenty-eight configurations, including 22215G at 6.5 inches and 22702 at 6.83 inches; this is not operating clearance.

Try these choices in the finder →

At a 7.2-inch width cap with earlier=yes and two slices, thirty-six configurations match, including 22622PS at 6.6 inches and current-reference 22624G at 5.3 inches, Proctor Silex 22305 at 6.5 inches, 22660/22661 at 6.7 inches and 22790 at 6.88 inches; 22791 and 22792 fit at 7.09 inches.

Try these choices in the finder →

The earlier-inclusive two-slice 7.3-inch width screen contains thirty-seven configurations, including 22215G at 6.5 inches, 22702, 22790, 22714G, 22782 and 22785; body width is not clearance.

Try these choices in the finder →

With earlier models included and two slices selected, the 11.4-inch body-depth screen returns fifty configurations, including 22215G at 10.3 inches, earlier 22622PS at 10.7 inches, current-reference 22624G at 10.3 inches, 22790 at 11.06 inches, 22791/22792 at 11.02 inches and 22796 at 11.1 inches.

Try these choices in the finder →

The earlier-inclusive two-slice 11.5-inch depth screen returns fifty configurations, including 22215G at 10.3 inches and the separately documented 22714G, 22782/22785, 22790, 22791/22792, 22796 and 22721 bodies. Depth is not clearance.

Try these choices in the finder →

With earlier=yes, two slices and an 11.7-inch depth cap, fifty-five configurations match, including 22215G at 10.3 inches, 22622PS at 10.7 inches and 22624G at 10.3 inches, plus 22790, 22791/22792 and 22796 at their published depths.

Try these choices in the finder →

At an 11.8-inch body-depth cap, fifty-four earlier-inclusive two-slice configurations match, including 22215G at its 10.3-inch outside depth; body depth does not include clearance.

Try these choices in the finder →

With earlier=yes, two slices, an 11.1-inch depth cap and a 6.8-inch width limit, twelve reviewed configurations remain, including 22215G at its published 6.5-by-10.3-inch body. These limits are not clearance.

Try these choices in the finder →

At 6.9 by 11.1 inches, the earlier-inclusive two-slice result admits 22790 at its 6.88-by-11.06-inch body and excludes 22121; neither body cap is clearance.

Try these choices in the finder →

At 6.9 inches wide by 11.0 inches deep, the earlier-inclusive two-slice result excludes 22790 at its 11.06-inch depth while 22217 and 22217F remain. This is not clearance.

Try these choices in the finder →

With earlier models, two slices, Bagel and 7.2-by-11.7-inch body caps selected, twenty-one configurations match, including Proctor Silex 22660/22661 at 6.7 by 10.4 inches. Their manual adds Bagel time but gives no maximum food size or heating-face pattern.

Try these choices in the finder →

At the paired 7.3-by-11.8-inch limit, the earlier-inclusive two-slice Bagel set includes 22790 at 6.88 by 11.06 inches and 22702 among twenty results; 22785 also meets its published body limits, as do digital-panel 22796 at 6.3 by 11.1 inches and 22791 and digital-display 22792 at 7.09 by 11.02 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

22998's shallow body and width boundary

With earlier models included, two slices required and width held open at 24 inches, a 5.4-inch depth ceiling leaves the 22977J but excludes 22998 at 5.5 inches deep.

Try these choices in the finder →

With earlier models included, two slices required and width held open at 24 inches, the next 0.1-inch step—5.5 inches of body depth—admits 22998 alongside the 22977J.

Try these choices in the finder →

With earlier models included and two slices selected, a 6.8-inch body-width ceiling excludes 22702 because its exact U.S. page lists 6.83 inches; 22992 remains an in-library option.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

The current-reference 22217 begins at a 6.5-inch body-width limit

With earlier models excluded and two slices required, a 6.4-inch width cap excludes the 22217 at its published 6.5-inch width; the 4.6-inch-wide 22989 remains an in-limit comparison.

Try these choices in the finder →

With earlier models excluded and two slices required, raising the width cap to 6.5 inches admits the exact 22217 at its published outside width; that is not counter clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

The current-reference 22217 begins at a 10.3-inch body-depth limit

Under the same current-reference two-slice condition, a 10.2-inch depth cap excludes the 22217 at its exact 10.3-inch body depth; the shallow 22977J is an in-limit example.

Try these choices in the finder →

Raising the same current-reference two-slice depth ceiling from 10.2 to 10.3 inches first admits the 22217 at its published depth.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Earlier status, two slices and both body dimensions

With earlier models included, two slices and 11.2-inch width by 6.4-inch depth caps, 22998, 22977J and 22721 (11.2 inches wide by 6.2 inches deep) pass; the 22623G and 22623V are both 11.3 inches wide, while base 22623 is 12.6 inches deep. Body size is not clearance.

Try these choices in the finder →

Raising the same earlier-inclusive width ceiling to 11.3 inches admits 22614R, 22623G and 22623V at their exact body limits while keeping 22721 in the set; base 22623 remains too deep at 12.6 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

Earlier status and the 6.4-inch depth edge

Even with earlier models included, the 11.3-inch width ceiling cannot offset a 6.3-inch depth cap: 22623G and 22623V are each 6.4 inches deep, while 22998, 22977J and 22721 remain within both body limits.

Try these choices in the finder →

At 6.4 inches of body depth, 22614R and the 22623G/V pair enter together at their respective listed dimensions; current-reference 22721 also fits its 6.2-inch body depth and 11.2-inch width. Base 22623 remains outside at 12.6 inches. This remains a two-slice library match, not a seller or clearance determination.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

Current-reference two-slice base 22623 dimensions together

With earlier models excluded, two slices and a 12.6-inch depth ceiling, a 7.0-inch width limit keeps the 7.1-inch-wide base 22623 out; 22614V fits at 6.4 inches, while 22623G is earlier and 22623V is 11.3 inches wide.

Try these choices in the finder →

At the next 0.1-inch width step, the same two-slice 12.6-inch-deep screen admits base 22623 at its exact 7.1-inch width; current-reference 22623V remains too wide and 22623G remains excluded by earlier=no, while the separate 22614V already passes at 6.4 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22614V just outside a 6.3-inch width cap

At a 6.3-inch maximum body width, with earlier models excluded, two slices selected and depth held at 11.3 inches, 22794 and 22794G match at their exact 6.3-by-11.1-inch body dimensions while 22614V is outside at 6.4 inches wide.

This reviewed library has no documented two-slice current-reference model within both a 6.3-inch body-width cap and an 11.3-inch body-depth cap.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22614V at the 6.4-inch width step

At a 6.4-inch maximum body width, with earlier models excluded, two slices selected and depth held at 11.3 inches, six reviewed models match: digital-panel 22796 and 22794/22794G at 6.3 by 11.1 inches, 22216G at 5.3 by 10.1 inches, and 22614V and Proctor Silex 22304G at 6.4 by 11.3 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

22614R just outside an 11.2-inch width cap

With earlier models included, two slices selected and depth held at 6.4 inches, an 11.2-inch maximum width returns Hamilton Beach 22998, 22977J and 22721; 22614R is outside because its body is 11.26 inches wide.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22614R reaches the 11.3-inch width step

With earlier models included, two slices selected and depth held at 6.4 inches, an 11.3-inch maximum width returns six reviewed matches: 22614R, 22623G, 22623V, 22998, 22977J and 22721.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22614V outside an 11.2-inch depth cap

At an 11.2-inch maximum body depth, with earlier models excluded, two slices selected and width held at 6.4 inches, four reviewed models match: 22796, 22794/22794G and 22216G; the 22614V and Proctor Silex 22304G remain outside at 11.3 inches.

No reviewed current-reference two-slice configuration in this library fits a 6.4-inch maximum body width together with an 11.2-inch maximum depth.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22614V at the 11.3-inch depth step

At an 11.3-inch maximum body depth, with earlier models excluded, two slices selected and width held at 6.4 inches, six models remain in the reviewed set: 22796, 22794/22794G, 22216G, 22614V and Proctor Silex 22304G at their listed body limits. These outside-body dimensions are not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

22614R just beyond a 6.3-inch depth cap

With earlier models included, two slices selected and width held at 11.3 inches, a 6.3-inch maximum depth returns 22998, 22977J and 22721 at 6.2 inches deep; 22614R is outside at 6.34 inches deep.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22614R reaches the 6.4-inch depth step

With earlier models included, two slices selected and width held at 11.3 inches, a 6.4-inch maximum depth returns six reviewed matches: 22614R, 22623G, 22623V, 22998, 22977J and 22721.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both limits matter: 6.4 inches wide by 11.1 deep

With earlier models excluded, two slices selected, a 6.4-inch width ceiling and an 11.1-inch depth ceiling, the exact 22794 and 22794G match at 6.3 by 11.1 inches; 22714G fits the depth but exceeds the width cap at 6.5 inches.

This is not a market-wide absence claim or clearance approval.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

6.5 inches wide by 11.0 deep still excludes 22714G

With earlier models excluded and two slices selected, a 6.5-by-11.0-inch body screen admits the separately reviewed 22217 but excludes 22714G: its 6.5-inch width passes while its exact 11.1-inch depth is one tenth over the cap.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

6.5 inches wide by 11.1 deep reaches 22714G

With earlier models excluded and two slices selected, a 6.5-by-11.1-inch body screen admits six reviewed configurations: 22714G and 22217, plus digital-panel 22796 and the separate 22794/22794G codes at their 6.3-by-11.1-inch body dimensions.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

Two slices and both exact body limits meet at 22216G

With earlier models excluded, two slices selected, and body-only caps of 5.3 by 10.1 inches, exact Proctor Silex 22216G is the sole match. Its published shell size does not include clearance or rear-tray access. Read the exact review.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A one-tenth-inch width change leaves no reviewed match

With earlier models excluded, two slices selected and body caps of 5.2 by 10.1 inches, no configuration in this reviewed library matches both limits. The 22216G misses the 5.2-inch width cap; the narrower 22989 exceeds the 10.1-inch depth cap.

In this reviewed library, no current-reference two-slice configuration is documented within both 5.2 inches of body width and 10.1 inches of body depth; 22216G exceeds width and 22989 exceeds depth. This is not a claim that no other toaster exists.

Try these choices in the finder →

Earlier 22215G body limits are exact, but not clearance

With earlier models included, two slices selected, a 6.4-inch width cap and 10.3-inch depth cap, only 22216G matches; the earlier 22215G remains outside because its published width is 6.5 inches.

Try these choices in the finder →

With earlier models included, two slices selected, a 6.5-inch width cap and 10.2-inch depth cap, only 22216G matches; 22215G remains outside until the depth cap reaches its listed 10.3 inches.

Try these choices in the finder →

At the exact earlier-inclusive 6.5-by-10.3-inch two-slice body limits, five configurations match, including 22215G; the base 22215 and 22216 pages publish no numeric body size and are not assumed to fit. This is not clearance.

Try these choices in the finder →

With earlier models excluded, the same 6.5-by-10.3-inch two-slice body caps return three current-reference configurations; 22215G is excluded by the status answer even though its published body fits the numeric limits. This is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A one-tenth-inch width change leaves no reviewed match

With earlier=yes and two slices, the exact Proctor Silex 22622PS, 22632PS and 22624G profiles fit published width and depth caps of 6.6 by 10.7 inches: 22622PS and 22632PS each list a 6.6-by-10.7-inch body, and 22624G lists 5.3 by 10.3 inches. The base 22632 has no numeric body dimensions and does not pass both screens.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A one-tenth-inch width change leaves no reviewed match

Keeping earlier=yes, two slices and a 10.7-inch depth cap but reducing width to 6.5 inches excludes 22622PS at its 6.6-inch body width; 22624G remains within both body caps. Read the 22622PS and 22624G assessments, then find with the same narrower width and unchanged depth.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

A one-tenth-inch width change leaves no reviewed match

With earlier=yes, two slices and a 6.6-inch width cap, a 10.6-inch depth maximum excludes 22622PS at its 10.7-inch listed body depth but keeps 22624G at 10.3 inches. Read the 22622PS and 22624G reviews and find the same answer at 10.6 inches deep.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

compact 22612PS body-size boundaries

With earlier=yes, two slices, a 5.3-inch width cap and a 10.1-inch depth cap, exactly two configurations satisfy both known body limits: 22612PS and 22216G, each listed at 5.3 by 10.1 inches. This does not establish slot fit or clearance; 22612 remains outside the numeric match because its body dimensions are unknown.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

compact 22612PS body-size boundaries

No reviewed model matches the combined earlier=yes, two-slice, 5.2-inch width and 10.1-inch depth limits; the 22612PS and 22216G are both 5.3 inches wide, one tenth beyond the width cap. The base 22612's unknown body width is not treated as a fit.

No reviewed model matches the combined earlier=yes, two-slice, 5.2-inch width and 10.1-inch depth limits; the 22612PS and 22216G are both 5.3 inches wide, one tenth beyond the width cap.

Try these choices in the finder →

compact 22612PS body-size boundaries

No reviewed model matches the combined earlier=yes, two-slice, 5.3-inch width and 10.0-inch depth limits; the 22612PS and 22216G both need a 10.1-inch body-depth cap. Unknown dimensions of base 22612 do not satisfy an essential numerical limit.

No reviewed model matches the combined earlier=yes, two-slice, 5.3-inch width and 10.0-inch depth limits; the 22612PS and 22216G both need a 10.1-inch body-depth cap.

Try these choices in the finder →

Check the 22624's two body limits together

At a 5.3-inch width cap and 10.2-inch depth cap with earlier models and two slices selected, 22612PS and 22216G remain inside their 5.3-by-10.1-inch body limits, but 22624 is excluded until depth reaches its listed 10.3 inches.

Try these choices in the finder →

At the next 5.3-by-10.3-inch two-slice body screen with earlier models included, four configurations match: 22216G, 22612PS, base 22624 and distinct current-reference 22624G.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both 24633G body limits pass at 10.2 by 10.4 inches

With earlier models included and four slices selected, a 10.2-inch width plus 10.4-inch depth cap returns Hamilton Beach 24633G and current-reference 24997F among the reviewed four-opening identities; plain 24633, 24444 and 24671 exceed the width limit.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both limits admit plain 24633 at the next tenth-inch steps

Raising both limits to 10.3 inches wide and 10.5 inches deep adds plain 24633 beside current-reference 24633G and 24997F; neither 24671 nor 24444 reaches this combined width cap.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Four-slot width threshold: Hamilton Beach 24633G is outside at 10.1 inches

With earlier models included and four slices required, a 10.1-inch body-width cap excludes 24633G at its exact 10.2-inch published width; unknown width for 24614Z does not pass.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Four-slot width threshold: 24633G enters at 10.2 inches

At a 10.2-inch maximum body width, 24633G and current-reference 24997F first pass their documented width limits; earlier plain 24633 remains out at 10.23 inches, while 24820 also fits at 6.6 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Four-slot width threshold: plain 24633 enters at 10.3 inches

At a 10.3-inch body-width limit, earlier 24633 joins the matches at its exact 10.23-inch body width, alongside 24633G and current-reference 24997F; 24820 also remains in-range, while 24671 and 24444 are wider.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Four-slice width limits: exact Hamilton Beach body thresholds

At a 10.4-inch body-width ceiling, earlier four-slice Hamilton Beach 24781 first enters at its exact 10.4-inch published width; 10.3 inches is too narrow. This outside-body screen does not include working clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Four-slot depth threshold: 24671 is outside at 10.2 inches

With earlier models included, a 10.2-inch four-slice body-depth cap excludes 24671 at 10.25 inches and excludes 24633G at 10.4 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Four-slot depth threshold: 24671 first passes at 10.3 inches

At a 10.3-inch body-depth ceiling, earlier 24671 joins at its 10.25-inch listed depth and current-reference 24997F also fits at 10.0 inches; 24633G at 10.4 inches and plain 24633 at 10.43 inches remain outside.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Earlier 24810: width and depth boundaries together

At an earlier-inclusive four-slice limit of 7.4 inches wide and 15.8 inches deep, earlier 24820 is the one matching Hamilton Beach body; 24810 is excluded because its exact outside body is 7.5 by 15.77 inches.

At an earlier-inclusive four-slice limit of 7.4 inches wide and 15.8 inches deep, 24810 is excluded because its exact outside body is 7.5 by 15.77 inches.

Try these choices in the finder →

At the same earlier-inclusive four-slice body screen, raising width from 7.4 to 7.5 inches admits 24810 alongside 24820; 24810 is 7.5 inches wide and 24820 is 6.6 inches wide.

Try these choices in the finder →

At 7.5 inches wide but 15.7 inches deep, earlier 24820 fits while 24810 is excluded because its listed outside depth is 15.77 inches.

At 7.5 inches wide but 15.7 inches deep, the earlier-inclusive four-slice 24810 is excluded because its listed outside depth is 15.77 inches.

Try these choices in the finder →

At 7.5 inches wide and 15.8 inches deep, both earlier 24810 and 24820 fit the same four-slice body screen; 24810 is 7.5 by 15.77 inches and 24820 is 6.6 by 15.7 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Capacity, pair controls, Bagel and compact body limits

Decision: At 10.1 inches wide, no reviewed model meets the four-slice, pair-control, Bagel and 10-inch depth conditions because 24997F is 10.2 inches wide.

Try these choices in the finder →

Decision: At a 10.2-inch width cap, current-reference 24997F is the only reviewed match for the same four-slice, pair-control, Bagel and 10-inch depth conditions.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22721 two-slice Bagel fit at its published body edges

With earlier models excluded, two slices, Bagel and an 11.2-by-6.2-inch body cap admit both 22721 and 22977J; 22721 sits at each published limit.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22721 two-slice Bagel fit at its published body edges

With earlier models excluded, two slices, Bagel and a 6.2-inch depth cap held fixed, reducing body width to 11.1 inches excludes 22721; the 22977J remains.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22721 two-slice Bagel fit at its published body edges

With earlier models excluded, two slices, Bagel and an 11.2-inch width cap held fixed, reducing body depth to 6.1 inches excludes 22721; the 22977J remains.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

CPT-122 width boundary below the published body size

With earlier models included, two slices, Bagel, Defrost, a 10.9-inch maximum outside width and a 6.5-inch maximum mapped body depth, no reviewed configuration in this library meets the full combination; the CPT-122's listed 11-inch body width is over the cap.

The reviewed set has no documented two-slice, Bagel-and-Defrost configuration within both these body limits. This library result does not prove that no other toaster exists.

Try these choices in the finder →

CPT-122 at the 11-inch body-width boundary

With earlier models included, two slices, Bagel, Defrost, an 11-inch maximum outside width and a 6.5-inch maximum mapped body depth, the reviewed CPT-122 is the one documented match in this library.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

CPT-122 depth boundary below the mapped body length

With earlier models included, two slices, Bagel, Defrost, an 11-inch maximum outside width and a 6.4-inch maximum mapped body depth, no reviewed configuration in this library meets the full combination; the CPT-122's mapped body depth is 6.5 inches.

This reviewed library contains no documented arrangement meeting both the control requirements and these 11-by-6.4-inch body ceilings; the CPT-122 exceeds the depth cap by one tenth inch. This does not establish that no alternative toaster exists.

Try these choices in the finder →

Earlier Hamilton Beach 22790 width boundary

At 6.9 inches, the first valid tenth-inch width ceiling that reaches the 6.83-inch 22702 body admits it; this is not operating clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Earlier Hamilton Beach 22790 depth boundary

With earlier models included, two slices selected and an 11.1-inch body-depth cap, 22702 is excluded because its exact page lists 11.17 inches; the 22217 remains a documented in-library alternative. The exact 22790 is inside at 11.06 inches.

Try these choices in the finder →

At an 11.2-inch earlier-inclusive two-slice depth ceiling, 22702 passes at 11.17 inches and 22790 at 11.06 inches; body depth is not a clearance allowance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

two-slice controls within 6.8 by 11.1 inches

With earlier models excluded, two slices, Bagel and Defrost, and 6.8-by-11.1-inch body caps, four configurations match, including Proctor Silex 22660/22661 at 6.7 by 10.4 inches; 22794/22794G and 22796 also pass. Body limits do not prove clearance or food fit.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

the same controls at a 6.9-inch width cap

With the same two-slice control and lifecycle conditions at a 6.9-by-11.1-inch body cap, six configurations match, including Proctor Silex 22660/22661, CPT-620P1, 22782 and 22794/22794G; the extra 0.1 inch admits 22782. This is not operating clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

one documented match at a 6.9-by-11.0-inch cap

With earlier models excluded, two slices, Bagel and Defrost required, a 6.9-inch width cap and an 11.0-inch depth cap, Proctor Silex 22660/22661 is the one reviewed match at its exact 6.7-by-10.4-inch body size; 22782 remains outside at 11.1 inches deep. This is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

the same controls at an 11.1-inch depth cap

With the two-slice control and lifecycle conditions at a 6.9-by-11.1-inch cap, six configurations match, including Proctor Silex 22660/22661 at 6.7 by 10.4 inches and 22782, 22794/22794G and CPT-620P1. Neither body limit is clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Frozen and Bagel controls within 7.0 by 11.1 inches

With earlier models excluded, two slices, Frozen and Bagel, and a 7.0-by-11.1-inch body cap, six configurations match, including Proctor Silex 22660/22661 at 6.7 by 10.4 inches and 22796/22794/22794G. The 7.09-inch 22785 remains outside this width limit.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Frozen and Bagel controls within an 11.0-inch depth cap

With earlier models excluded, two slices, Frozen and Bagel, a 7.1-inch width cap and an 11.0-inch depth cap, Proctor Silex 22660/22661 is the one reviewed match at 10.4 inches deep; 22785 at 11.02 inches and 22794/22794G at 11.1 inches remain outside. This is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

both Proctor Silex body limits pass together

With earlier models excluded, two slices, Frozen and Bagel, and 7.1-by-11.1-inch body caps, seven configurations match, including Proctor Silex 22660/22661, digital-panel 22796, 22794/22794G, 22785 at 7.09 by 11.02 inches and 22782. These body limits do not prove food fit or clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

22791 and digital 22792 are just outside a 7.0-inch width cap

With earlier models included, two slices and dedicated Bagel and Defrost controls selected, plus a 24-inch depth ceiling, a 7.0-inch width cap excludes both 22791 and digital-display 22792 because each exact page lists a 7.09-inch body width; 22790 remains a documented in-library example at 6.88 inches. These are outside-body checks, not clearance or food-fit evidence.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both earlier Hamilton Beach bodies enter at the 7.1-inch width step

Raising only the width cap to 7.1 inches admits both 22791 and digital-display 22792 at their exact 7.09-inch published body widths while earlier models, two slices, Bagel, Defrost and the 24-inch depth ceiling remain fixed; this outside-body screen is not clearance. Their controls and page-linked guides differ: the 22791 has a manual shade dial/T87 guide and 22792 a digital setting display/T103 guide.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both earlier Hamilton Beach bodies are just beyond an 11.0-inch depth cap

With earlier models, two slices, Bagel and Defrost required and body width held to 24 inches, an 11.0-inch depth cap excludes both 22791 and digital-display 22792 at their published 11.02-inch depths; Breville BTA735 remains an in-library match under these same selected conditions. Body depth is not safe counter clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both earlier Hamilton Beach bodies enter at the 11.1-inch depth step

Raising only the body-depth cap to 11.1 inches is the first tenth-inch step that admits both 22791 and digital-display 22792 at their exact 11.02-inch published body depths, while earlier status, two-slice capacity, Bagel, Defrost and a 24-inch width ceiling remain fixed; this is not clearance. Their separate reviews document the T87 manual-dial and T103 digital-setting configurations.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Both control requirements and body limits together

With earlier models excluded, requiring two slices, documented Bagel and Defrost controls, and body caps of 6.7 by 10.4 inches yields one reviewed result: Proctor Silex 22660 White / 22661 Red. Its buttons are selected separately after cycle start; this match does not establish a combined sequence, slot fit, or working clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

One tenth below the Proctor Silex body-width limit

At a 6.6-by-10.4-inch body cap with earlier models excluded and two slices, Bagel and Defrost required, no reviewed configuration passes all conditions: Proctor Silex 22660/22661 are 6.7 inches wide. This body-only result does not describe every toaster.

The exact 6.7-inch outside width exceeds the 6.6-inch ceiling, so this model does not match the selected two-slice Bagel/Defrost and depth combination.

Try these choices in the finder →

One tenth below the Proctor Silex body-depth limit

At a 6.7-by-10.3-inch body cap with earlier models excluded and two slices, Bagel and Defrost required, no reviewed configuration passes all conditions: Proctor Silex 22660/22661 are 10.4 inches deep. This body screen is not rear-tray clearance.

The exact 10.4-inch outside body depth exceeds the 10.3-inch ceiling, so this model does not match the selected two-slice Bagel/Defrost and width combination.

Try these choices in the finder →

Four-slice pair controls with both outside-body limits

Decision: With earlier models excluded, four slices, separate pair controls, a 10.9-inch width limit and a 10.5-inch depth limit selected, two reviewed configurations remain: 24997F and archive-listed 24633G. The 24214PS and 24215G are excluded at 11 inches wide.

Try these choices in the finder →

Decision: Raising only the width cap to 11.0 inches while keeping earlier=no, four slices, pair controls and 10.5-inch depth adds white 24214PS and black 24215G to the five-model set with CPT-435P1, 24997F and archive-listed 24633G.

Try these choices in the finder →

Decision: With width held to 11.0 inches but depth reduced to 10.4 inches, 24997F and archive-listed 24633G remain the two four-slice pair-control matches; the 24214PS and 24215G bodies exceed this depth cap at 10.5 inches.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

More reviewed examples for this requirement

Unknown body dimensions do not pass a numeric counter screen

Decision: With earlier models included, four slices, separate pair controls and 24.0-inch width and depth caps, 30 configurations match; 24610 and 24622 still do not pass because neither exact model has published body dimensions. The cap is not clearance.

Try these choices in the finder →

Read the model-specific features and tradeoffs:

Put these details together for your kitchen.

Build my shortlist →